Gyprock Superfine Plaster is used for joint finishing of fibre-reinforced plaster sheets and cornices, as well as general casting applications.
Product Overview
This plaster is grit free and is specially formulated or finishing joints in plaster sheets. Its superfine particle size makes it ideal for fine work including finishing cornice mitres and joints.
It is a low VOC plaster manufactured by Gyprock in Australia to stringent product specifications and packed in a green coloured bag.
Typical Applications
Superfine Plaster is typically used to finish joints in fibre reinforced plaster sheets, plaster glass and cast plaster cornices. Cornice mitres and joints can be finished with a broad knife or small tool.
Key Features
Australian Made
Licensed by Australian Made Campaign Ltd
Specialty Plaster
Specialty plaster for specific uses
Fine Particle Size
Suitable for intricate moulds
25 Year Warranty
Specify and install with confidence
Technical Specifications
Superfine Plaster is available in a 20kg bag and has a shelf life of 1 year from date of manufacture.
For product availability and to place an order, contact your nearest supplier.
Superfine Plaster is manufactured by CSR Gyprock in Australia to stringent product specifications.
| Specific gravity (H2O=1) | 2.4 approx. |
|---|---|
| VOC content (as specified by GBCA) | 2g/L as VOC content per material |
Transportation and manual handling: Refer to the Gypsum Board Manufacturers of Australia (GBMA) website for recommended OH&S practices.
Storage: Store bags in a dry environment, protected from the weather and out of direct sunlight. Tear bag open from top corner to dispense compound. Unused product which has been mixed with water should be discarded. Unused product in powder format should be stored in original bag: roll the top of the bag to loosely seal, and store in an airtight container.
Safety Data Sheets are important documents in the construction industry and assist in the continuing focus on occupational health and safety on and off sites.
Performance Guaranteed
Licensed by Australian Made Campaign Limited to use the Australian Made Logo.
Gyprock plasterboard products are manufactured for life with all CSR products designed to achieve optimal performance when part of a CSR integrated system.
Verified by an independent conformity assessment body to meet the environmental, health and social/ethical criteria of the GECA Panel Boards standard.
.png&w=3840&q=80&dpl=dpl_HkMjFor5QWPnRZUp6xaCxrToueMd)