This board sets the Standard for commercial applications. Gyprock Standard 13mm works as a general internal wall and ceiling lining in a huge range of commercial applications.
Product Overview
Gyprock Standard 13mm is manufactured in Australia to meet and exceed the requirements of Australian Standard AS/NZS 2588.
The go-to for commercial construction, Gyprock Standard 13mm can also be used residential to deliver a more robust, acoustically sound lining.
Typical Applications
Gyprock Standard 13mm is typically used as a wall and ceiling lining option in commercial applications including non-fire or acoustic rated walls and partitions.
Recommendation
Gyprock Standard is not recommended for use where it would be in contact with water or a constant relative humidity above 90%. For wet areas, Gyprock Fyrchek™ MR, Gyprock EC08™ Complete or Gyprock EC08™ Extreme would be more suitable.
Key Features
Versatile
Suitable for walls and ceilings
Excellent score and snap
Easier to use
Australian Made
Licensed by Australian Made Campaign Ltd
Technical Specifications
Gyprock Standard 13mmis available in the following sizes:
| Thickness | 13mm |
| Widths | 900mm 1200mm 1350mm 1400mm |
| Lengths | 2400mm 2700mm 3000mm 3600mm 4200mm 4800mm 6000mm |
| Edge Profiles | Recessed Edge for regular jointing Recessed Edge/Square Edge for low profile architectural mouldings Square Edge for applications not requiring jointing |
Stockholdings of specific sizes may vary in different regions. Click HERE for a list of stocked sizes in your state.
For the latest product availability in your area and to place an order, contact your nearest supplier.
Gyprock Standard 13mm is manufactured by CSR Gyprock in Australia to stringent product specifications.
| Nominal Thickness | 13mm ± 0.5mm |
| Nominal Widths | 900mm, 1200mm, 1350mm, and 1400mm ± 3mm |
| Nominal Lengths | From 2400 to 6000mm ± 5mm, typically in 300mm increments |
| Squareness | Cut ends ± 3mm in the width of the board |
| Nominal Board Weight* | 8.5kg/m2 |
| Thermal Resistance | 0.05 - 0.07 m2K/W |
| Fire Hazard Properties∆ | Group No = 1 SMOGRARC <100 m2/s2 |
| Combustibility◊ | Plasterboard may be used wherever a non-combustible material is required. |
| Total Recycled Content | 3.7% |
* Subject to reasonable manufacturing variance
∆ In accordance with AS ISO 9705 and AS 5637.1
◊ In accordance with NCC2022 Vol 1 Clause C2D10(6)(a) and NCC2019 Amdt1 Vol Clause C1.9(e)(i).
Transportation and manual handling: Refer to the Gypsum Board Manufacturers of Australia (GBMA) website for recommended OH&S practices.
Storage: Protect plasterboard and cornice from weather and moisture. Avoid products sagging by storing horizontally, supported on a level platform or full-width support members spaced at max. 600mm centres.
Safety Data Sheets are important documents in the construction industry and assist in the continuing focus on occupational health and safety on and off sites.
Installation Instructions
Install to manufacturer's recommendations as outlined in the relevant Installation Guide.
Performance Guaranteed
Licensed by Australian Made Campaign Limited to use the Australian Made Logo.
Gyprock plasterboard products are manufactured for life with all CSR products designed to achieve optimal performance when part of a CSR integrated system.
Verified by an independent conformity assessment body to meet the environmental, health and social/ethical criteria of the GECA Panel Boards standard.
Explore more
