Gyprock® Stud Adhesive XL is used for adhering plasterboard and fibre cement wallboard to timber and steel frames.
Product Overview
Gyprock Stud Adhesive XL is a simple way to adhere plasterboard sheets to timber wall studs and ceiling joists as well as metal framing members. It is specially formulated to offer superior adhesion and slump resistance.
Stud Adhesive XL is easily identified by its distinctive blue colour, while the bulk pack provides greater coverage onsite.
Typical Applications
Gyprock Acrylic Stud Adhesive is widely used in residential and commercial wall and ceiling applications. It is not for use in fire rated systems or for walls where tiles will be applied.
Key Features
Superior Adhesion
Strong initial grab with superior adhesion & slump resistance
Easy Application
Apply with a stud adhesive applicator
Greater Coverage
Bulk Pack for greater coverage
Australian Made
Licensed by Australian Made Campaign Ltd
Fixing Systems - for steel and timber framed walls and ceilings
In most situations, the recommended fixing system for interior walls and ceilings is a combination of adhesive, such as Acrylic Stud Adhesive, and permanent fasteners such as nails or screws.
Depending on the characteristics and positioning of the wall or ceiling, various combinations of fixing materials are recommended. For example, the fastener only fixing system is to be used on walls which will be tiled, over existing linings or in fire rated installations. To check which fixing system is best for your application, refer to the Gyprock Residential Installation Guide.
Technical Specifications
| Specific gravity (H2O=1) | 1.3-1.7 |
| VOC content (as specified by GBCA) | 37g/L as per VOC content per material |
Transportation and manual handling: Refer to the Gypsum Board Manufacturers of Australia (GBMA) website for recommended OH&S practices.
Storage: Store buckets of compound in a dry environment out of direct sunlight. Remove lid and stir prior to use. Unused product should be stored by resealing the original bucket. Remix prior to use. Discard if drying has commenced. Store unopened sausages below 30°C in a cool dry place away from direct sunlight. Opened sausages may skin and form a lump near the opening. Discard any lumps or skin and remaining product can be used.
Safety Data Sheets are important documents in the construction industry and assist in the continuing focus on occupational health and safety on and off sites.
Installation Instructions
AS/NZS2589: Gypsum linings – Application and Finishing outlines the procedures for the installation and finishing of Gyprock Perforated Plasterboard in conjunction with additional details contained in Gyprock Technical Literature.
Performance Guaranteed
Licensed by Australian Made Campaign Limited to use the Australian Made Logo.
Gyprock plasterboard products are manufactured for life with all CSR products designed to achieve optimal performance when part of a CSR integrated system.
Explore more
