Gyprock All-Coat MAX™ is a semi-lightweight all-purpose compound, used as a three-coat plasterboard jointing system or as a topping coat only. The premixed compound is in a 20kg bucket providing MAX coverage.
Product Overview
Gyprock All-Coat MAX™ is a semi-lightweight all-purpose compound, used as a three-coat plasterboard jointing system or as a topping coat only. Its creamy consistency and excellent workability make it suitable for both hand and mechanical application, while the light-yellow tint allows easy identification over previous coats.
Typical Applications
Gyprock All-Coat MAX is typically used for each coat in a three-coat jointing system in residential and commercial walls and ceilings. It is designed for hand and hand tool application.
Key Features
All-Purpose
Use for all coats of a 3 coat joint system
Smooth Finish
Creamy consistency for smooth, easy application
Pre-mixed
Quick to prepare and easy to apply
MAX Coverage
Designed for maximum coverage
Versatile Application
Hand or machine tool applied
Australian Made
Licensed by Australian Made Campaign Ltd
Compound Selection
| Tape Coat | Second Coat* | Finish Coat |
| Any of the following: | Any of the following: | Any of the following: |
| Base Coat 20 Base Coat 45 Base Coat 60 Base Coat 90 Ultra-Base MR 60 Easy Base Taping Compound Wet Area Base Coat Easy-Flow All-Coat MAX Pro-Repair 10 Less Mess Multi-Purpose Compound | Base Coat 20 Base Coat 45 Base Coat 60 Base Coat 90 Ultra-Base MR 60 Easy Base Taping Compound Wet Area Base Coat Easy-Flow All-Coat MAX Pro-Repair 10 Less Mess Multi-Purpose Compound | Jointmaster Ultra-Top Easy Finish Gold Easy-Flow All-Coat MAX Less Mess Topping Compound Less Mess Multi-Purpose Compound Pro-Repair 10 (over setting type base coats only) |
Technical Specifications
Gyprock All-Coat MAX™ is available in the following pack size:
| Pack | 20kg (14L approx.) |
| Coverage - Tape & Second Coat | 24kg/100m2 |
| Coverage - Topping Coat | 8kg/100m2 |
Gyprock All-Coat MAX™ is manufactured by CSR Gyprock in Australia to stringent product specifications.
| Specific gravity (H2O=1) | 1.3-1.5 |
| VOC content (as specified by GBCA) | 1g/L as VOC content per material |
Transportation and manual handling: Refer to the Gypsum Board Manufacturers of Australia (GBMA) website for recommended OH&S practices.
Storage: Store buckets of compound in a dry environment out of direct sunlight. Remove lid and stir prior to use. Unused product should be stored by resealing the original bucket. Remix prior to use. Discard if drying has commenced.
Safety Data Sheets are important documents in the construction industry and assist in the continuing focus on occupational health and safety on and off sites.
Installation Instructions
AS/NZS2589: Gypsum linings – Application and Finishing outlines the procedures for the installation and finishing of Gyprock Perforated Plasterboard in conjunction with additional details contained in Gyprock Technical Literature.
Performance Guaranteed
Licensed by Australian Made Campaign Limited to use the Australian Made Logo.
Gyprock plasterboard products are manufactured for life with all CSR products designed to achieve optimal performance when part of a CSR integrated system.
Explore more
