Your recent searches

results found for ''

Load More

Narrow your results

When you’re in a hurry reach for Gyprock Pro-Repair 10, a quick drying all-purpose jointing compound for use in repairs and on small-scale jointing jobs.

Product Overview

Pro-Repair 10 is a lightweight plaster based all-purpose compound used as all coats in a three coat jointing system or as a base coat only. this low VOC dry powder has been engineered with a super fast 10 minute working time after mixing. Use Pro-Repair 10 for all three coats with FibaFuse tape to ensure the project can be jointed and sanded on the same day after sufficient drying time. 

Typical Applications

Gyprock Pro-Repair 10 is typically used as all coats in a three coat jointing system, for plasterboard and fibre cement in smaller residential and commercial wall and ceiling jointing projects. It is also ideal for patching holes and defects. Hand application is recommended given the short working time.
Gyprock® Pro-Repair 10 Compound in 8kg non-resealable bag.
Australian Made logo in black and white

Australian Made

Licensed by Australian Made Campaign Ltd
rapid setting with lightning bolt

Rapid Setting

10 minute working time

all purpose icon with numbered checks

All-purpose

Use for all coats of a 3 coat joint system

repair icon with cracked item

Repairs and Maintenance

Great for patching holes and defects

Technical Specifications

Product Options

Gyprock Pro-Repair 10 is available in the following pack size: 

Pack 8kg Bag
Coverage 13kg/100m2

Shelf life is 1 year from manufacture.

For product availability and to place an order, contact your nearest supplier.

Physical & Chemical Properties

Specific gravity (H20=1) 1.0 - 1.6
VOC content (as specified by GBCA) 2g/L as VOC content per material

Product Manufacture

Gyprock Pro-Repair 10 is manufactured by CSR Gyprock in Australia to stringent product specifications.

Product Handling

Transportation and manual handling: Refer to the Gypsum Board Manufacturers of Australia (GBMA) website for recommended OH&S practices.

Storage: Store bags of compound in a dry environment, protected from the weather and out of direct sunlight. Tear bag open from top corner to dispense compound. Unused product which has been mixed with water should be discarded. Unused product in powder format should be stored in original bag: roll the top of the bag to loosely seal, and store in an airtight container.

Health and Safety

Safety Data Sheets are important documents in the construction industry and assist in the continuing focus on occupational health and safety on and off sites.

Installation Instructions

Installing to Standards

AS/NZS2589: Gypsum linings – Application and Finishing outlines the procedures for jointing and finishing of Gyprock plasterboard in conjunction with additional details contained in Gyprock Technical Literature.

 

Resources

Gyprock makes available resources that provide comprehensive selection, design, installation and maintenance guidance. 

Gyprock installer wearing PPE sanding down plaster on the wall

Repair Video

Using Pro-Repair 10

Australian Made

Australian Made

Licensed by Australian Made Campaign Limited to use the Australian Made Logo.
Manufactured For Life red logo with the shape of Australia in the centre.

Manufactured for Life

Gyprock plasterboard products are manufactured for life with all CSR products designed to achieve optimal performance when part of a CSR integrated system.

GECA Accredited

Verified by an independent conformity assessment body to meet the environmental, health and social/ethical criteria of the GECA Adhesives, Fillers & Sealants standard.