Gyprock Soundcheck moisture resistant plasterboard

Gyprock Soundcheksuptrade

Gyprock Soundchek is a high density gypsum plasterboard with increased noise absorption properties for residential and commercial walls and ceilings where superior acoustic resistance is required.

Soundchek provides effective airborne noise and impact noise insulation. Higher levels of noise control can be achieved by including bulk acoustic insulation in the Soundchek wall cavity.

For extreme noise situations where a high degree of impact noise or low frequencies is an issue, Gyprock recommends acoustic systems where the plasterboard is mounted to resilient mounts. This type of system provides effective separation between the wall surface and the frame which dramatically reduces noise that would normally be transmitted.

The dense core of Gyprock Soundchek also gives it a higher level of soft and hard body impact resistance.

Gyprock Soundchek is not suitable where it would be in contact with water or a constant relative humidity above 90%. For wet areas, the following products would be more suitable:

Gyprock Soundchek is manufactured in Australia to Australian Standard AS2588 and the heavy-duty face paper is a yellow colour.

Product Options

Gyprock Soundchek is available in 10mm and 13mm thicknesses and in 1350mm and 1200mm sheet widths respectively. The long edges are recessed for flush jointing.

In a horizontal setout, the 1200mm sheet width suits standard 2400mm ceiling heights and 1350mm suits 2700mm ceilings. In commercial applications, plasterboard is often installed vertically to cater for higher ceilings.

Gyprock Soundchek 10mm

Soundchek 10mm is part of Gyprock's Residential Specialty Options range of plasterboards, predominantly used for walls and ceilings in standard installations, where door frames and window reveals are generally designed for a 10mm internal lining.

More information about acoustic solutions in homes can be found under the Solutions tab.

Typical applications:

  • Bedrooms adjoining high traffic areas
  • Bathrooms
  • Ensuites
  • Entertainment and home theatre rooms
  • Kitchens and laundries where cupboard door and drawer noise is an issue
  • Between floors in multi-storey residences
  • Any non-wet area wall or ceiling where a higher level of sound insulation is required

Gyprock Soundchek 13mm

Soundchek 13mm is part of Gyprock's Commercial Select Options range of plasterboards, generally used for acoustic walls in commercial construction where an acoustic rated system is specified.

More information about acoustic solutions in commercial buildings can be found under the Solutions tab.

Typical applications:

  • Meeting rooms and quiet rooms in office buildings
  • Intertenancy walls in multi-residential developments
  • Patient wards and operating theatres in hospitals
  • Acoustic bulkheads and shafts


Comprehensive installation instructions for Gyprock Soundchek can be found under the Resources tab and include:

For assistance with installation, try searching for a Gyprock plasterer, builder or repairer under the Locations tab.​​


  • Gyprock products are manufactured for life with all CSR products designed to achieve optimal performance when part of a CSR integrated system
  • Clean offcuts of Gyprock Soundchek are suitable for the Gyprock Recycling service, where available.
  • Gyprock Soundchek is accredited to the GECA 04 – 2011 Panel Boards Standard which is compliant with the requirements of the GBCA’s Assessment Framework for product certification schemes.