Popular Search Terms

Your recent searches

results found for ''

Load More

Narrow your results

One Finish

Technical Specifications Installation Instructions

Gyprock One Finish is a pre-mixed acrylic compound designed to create a uniform surface on interior plasterboard or fibre cement walls and ceilings affected by critical lighting conditions.

Product Overview

One Finish reduces the difference in porosity, texture and sheen between board and jointing compound, to create a uniform white surface ready for decoration.

Due to its superior hiding power, it can be used as part of a level 5 finish specification under AS/NZS 2589.

Typical Applications

One Finish is rolled or sprayed directly onto the wall or ceiling, eliminating the need for trowel application. It is easy to sand, and where a level of final texture is acceptable, sanding is not required prior to the painting process. A polyester 10-12mm nap is recommended for general roller application, and the product should be allowed to dry for 16-24 hours prior to final painting and decoration. One Finish can also be applied onto already painted surfaces after lightly sanding.

Achieving a Level 5 Finish

The application of One Finish over a standard level 4 finish will improve the final surface and minimise the effects of critical light, however it will not automatically upgrade the work to a level 5 finish. A Level 5 Finish under AS/NZS 2589 cannot be achieved without a high degree of preparatory work, and this includes framing/substrate preparation to required tolerances.

For more information on achieving a Level 5 Finish, download our guide here

Gyprock One Finish product.
Product Data Sheet Safety Data Sheet Find a Supplier
Australian Made and Owned logo in black and white

Australian Made and Owned

Licensed by Australian Made Campaign Ltd
pre mixed icon with compound and tool

Pre-mixed

Quick to prepare, easy to apply

grit free icon

Smooth Finish

Smooth and easy to sand

filter spray on applied icon with spray and roller

Easy Application

Roll or spray-on

Technical Specifications

Product Options

Gyprock One Finish is available in a 20kg bucket with coverage of 5-7m2 per kg.

It has a shelf life of 1 year from date of manufacture. 

For product availability and to place an order, contact your nearest supplier.

Physical & Chemical Properties 

Specific gravity (H20=1) 1.6-2.0
VOC content (as specified by GBCA)

8g/L as VOC content per material

Product Manufacture

Gyprock One Finish is manufactured for CSR Gyprock in Australia to stringent product specifications.

Product Handling

Transportation and manual handling: Refer to the Gypsum Board Manufacturers of Australia (GBMA) website for recommended OH&S practices.

Storage: Store buckets in a dry environment out of direct sunlight. Remove lid and stir prior to use. Unused product should be stored by resealing the original bucket. Remix prior to use. Discard if drying has commenced.

Health and Safety

Safety Data Sheets are important documents in the construction industry and assist in the continuing focus on occupational health and safety on and off sites.

 

Installation Instructions

Installing to Standards

AS/NZS2589: Gypsum linings – Application and Finishing outlines the procedures for jointing and finishing of Gyprock plasterboard in conjunction with additional details contained in Gyprock Technical Literature.    

Resources

Gyprock makes available resources that provide comprehensive selection, design, installation and maintenance guidance. 

Installation Resources

Residential and commercial installation instructions.

View Resources
Australian Made and Owned

Australian Made and Owned

Licensed by Australian Made Campaign Limited to use the Australian Made Logo.
Manufactured For Life red logo with the shape of Australia in the centre.

Manufactured for Life

Gyprock plasterboard products are manufactured for life with all CSR products designed to achieve optimal performance when part of a CSR integrated system.

Explore more