Gyprock Standard Plasterboard 13mm

Gyprocksupreg Standard 13mm Plasterboard

Gyprock® Standard Plasterboard 13mm is part of the Commercial Select Range range of premium quality plasterboards. It is used for general internal wall and ceiling linings in commercial projects where no specific fire, acoustic or moisture resistant requirements are specified. Gyprock Standard 13mm Plasterboard is not suitable where it would be in contact with water or a constant relative humidity above 90%. For wet areas, the following products would be suitable:

Gyprock Standard 13mm Plasterboard is manufactured in Australia and accredited to Australian Standard AS2588 through SAI Global. The face paper is a buff colour.

Product Options

Gyprock Standard Plasterboard 13mm is available in 1200mm and 1350mm widths.

In commercial applications, plasterboard is generally installed vertically to cater for higher ceilings. Select a sheet length to suit the project's ceiling height.

Gyprock Standard Plasterboard 13mm is also available in different edge profiles for a variety of installation options.

Gyprock Standard Plasterboard 13mm - Recessed edge (RE) profile

RE is the standard profile for most plasterboard where both long edges of the board feature a recess that tapers approximately 60mm in from the edge. When butted together, these long recesses assist in producing a smooth, even and continuous surface when a jointing system of tape and compound is correctly applied.

Typical applications:
  • Commercial, non-fire or acoustic rated walls and partitions

Gyprock Standard Plasterboard 13mm - Square edge (SE) profile

SE has no recesses on any edge. This allows sheets to be butted together neatly to form a square finish or inserted into H moulds for wall panelling.

Typical applications:
  • Mainly used in commercial projects for partitioning where the edges/joints will be covered by aluminium, vinyl or timber.


Comprehensive installation instructions for Gyprock Standard Plasterboard 13mm can be found under the Resources tab

For assistance with installation, try searching for a Gyprock plasterer, builder or repairer under the Locations tab.


  • Gyprock products are manufactured for life with all CSR products designed to achieve optimal performance when part of a CSR integrated system
  • Accredited against the Australian Standard AS2588 – Gypsum Plasterboard through SAI Global. All Gyprock products are manufactured to comply with Australian Standards.
  • Clean offcuts of Gyprock® Standard 13mm Plasterboard are suitable for the Gyprock Recycling service, where available.
  • Gyprock® Standard 13mm Plasterboard is accredited to the GECA 04 – 2011 Panel Boards Standard which is compliant with the requirements of the GBCA’s Assessment Framework for product certification schemes.