Gyprock Masonry Adhesive is used for adhering plasterboard, plaster cornices and castings to plasterboard, masonry and concrete surfaces.
It is a low VOC compound manufactured by Gyprock in Australia to stringent product specifications and packed in an orange coloured bag.
Gyprock Masonry Adhesive provides high strength and strong adhesion to plasterboard, masonry and concrete surfaces.
Defined Setting Time
Masonry Adhesive is a setting type compound rather than a drying type with a working life of about 40-45 minutes.
Masonry Adhesive is easy to mix and spread with simple installation by hand using a small broadknife.
Apply 50mm diameter daubs of adhesive standing out a minimum 15mm. Space daubs at 450mm centres maximum both horizontally and vertically, 50mm in from the ends and edges of the sheet.
Daubs may be applied to the wall or to the back of the Gyprock plasterboard. Position plasterboard and hold in place until adhesive sets.
Levelling pads should be used where wall surface irregularities exceed 15mm.
Detailed application instructions can be found on the Gyprock Masonry Adhesive pack.
Masonry Adhesive is available as a dry powder in a 20kg bag.
More Installation Assistance
Comprehensive installation instructions for Gyprock plasterboard and compounds can be found under the Resources tab and include:
For assistance with installation, try searching for a Gyprock plasterer, builder or repairer under the Locations tab.