Note: Available in Western Australia only.
Gyprock Drywall Masonry Adhesive 100 is used for fixing plasterboard to masonry and concrete surfaces. It has a long working life which allows for the mixing of larger batches for more extensive projects. It is a low VOC compound manufactured by Gyprock in Australia to stringent product specifications and packed in a blue coloured bag.
Gyprock Drywall Masonry Adhesive 100 provides high strength and strong adhesion to masonry and concrete surfaces.
Defined Setting Time
Drywall Masonry Adhesive 100 is a setting type compound rather than a drying type with a working life of about 100 minutes. This longer working life allows for larger batches with less preparation and wash up.
Drywall Masonry Adhesive 100 is easy to mix and spread with simple broadknife installation.
Apply 50mm diameter daubs of adhesive standing out a minimum 15mm. Space daubs at 450mm centres maximum both horizontally and vertically, 50mm in from the ends and edges of the sheet.
Daubs may be applied to the wall or to the back of the Gyprock plasterboard. Position plasterboard and hold in place until adhesive sets.
Levelling pads should be used where wall surface irregularities exceed 15mm.
Detailed application instructions can be found on the Gyprock Drywall Masonry Adhesive 100 pack.
Gyprock Drywall Masonry Adhesive 100 is available as a dry powder in a 20kg bag.
More Installation Assistance
Comprehensive installation instructions for Gyprock plasterboard and compounds can be found under the Resources tab and include:
For assistance with installation, try searching for a Gyprock plasterer, builder or repairer under the Locations tab.